UV printers should pay attention to the following points in daily use and maintenance:
1. Daily maintenance:
Clean maintenance: Regularly clean the printer body, print head, guide rails, and other components to keep the equipment clean. Clean the gantry guide rails and grating bars ensure smooth sliding.
Check the status of the print head: Print a test strip every day to check the status of the print head and ensure there is noage, ink flying, etc. If any problems are found, deal with them in time.
Waste ink handling: Regularly empty the waste ink tank avoid ink solidification and blockage of the nozzle.
2. Environmental requirements:
Temperature and humidity: The working temperature of the UV printer is controlled at 18-30℃, and the humidity is 40%-70%. Avoid drastic changes in temperature and humidity, and avoid direct.
Ventilation: Ensure that there is sufficient ventilation around the equipment to avoid ink solidification and blockage of the nozzle.
3. safety:
Safety measures: Wear protective glasses during operation to avoid direct contact with strong light. Avoid touching moving parts when the equipment is running.
Power: Ensure that the power cord is grounded, and avoid power cords that are too long or damaged.
Chemical safety: Avoid contact with ink on skin and eyes, and provide sufficient ventilation facilities.
4. Specific maintenance steps:
Check before starting the machine: Print a test strip to confirm that the head status is normal.
During printing: Clean the residual ink on the surface of the print head with a special cleaning solution every 2 hours to avoid inkification and blockage of the nozzle.
Handle before shutting down: Print a print head test strip, shut down after confirming that the status is normal, drop a moisturizing agent on the print head, and cover it with a dust cover to protect the print head.
By taking the above measures, you can extend the service life of the UV printer and ensure the printing effect and quality.
